Windows XP Install

xtremeqban · 11-17-2010, 03:12 PM

I installed windows xp on my computer yesterday and after the install was done it restarted as it should but it did not proceed with the setup portion that i believe should be there. the BIOS stuff boots then my boot from disc but then it just sits there at the boot from disc screen. I tried partitioning the HDD to 130GB. Ive also googled for some solutions but nothing has helped so i turn to the help of the experts.

SnipingCoward · 11-18-2010, 07:26 AM

If your system is too new, you might have to provide Windows XP with some needed drivers. This can happen when you are using SATA and have an old XP CD (e.g. before SP1).

Post some specs please.

xtremeqban · 11-18-2010, 03:37 PM

Im not sure what what the cd had exactly on it.(got it from a teacher at school :P) As of specs
313GB Western Digital WDC WD3200AAJB-00J3A0 ATA Device (PATA)
512MB GeForce 7300 GT (BFG Tech)
ASUSTeK Computer INC. Yale (CPU 1)
3.0GB Dual-Channel DDR @ 199MHz (3-3-3-

MS Windows 7 Ultimate 32-bit

This comp had xp on it...HP Pavilion a350n Desktop PC Product Specifications HP Pavilion a350n Desktop PC - HP Customer Care (United States - English)

SnipingCoward · 11-18-2010, 05:46 PM

If you did not clear the HDD off Win7 before installing XP chances the boot record got screwed.
Are you prompted to select a Windows to boot?
If so try Booting Win7 or boot from a Win7 install disc. Then when it boots hit F8 to get advanced options. Choose Startup Repair and follow the instructions.

In cases like this I would resort to using a linux live CD, boot from that and use gParted to wipe and repartition drive.

xtremeqban · 11-18-2010, 08:32 PM

I formated the enitre HDD before i did and partitioned it and i then installed win 7 and the same error kept happening

SnipingCoward · 11-18-2010, 08:41 PM

Maybe the disc or it's files are corrupted.

Else: since you are using IDE drives make sure your Master-Slave configuration is correctly set up (in BIOS & Driver's jumpers & cable's slot order matters too sometimes [esp. if using CS])

11-17-2010, 03:12 PM	#1
xtremeqban Join Date: Mar 2009 Posts: 82 United States of America Location: Sarasota	Windows XP Install I installed windows xp on my computer yesterday and after the install was done it restarted as it should but it did not proceed with the setup portion that i believe should be there. the BIOS stuff boots then my boot from disc but then it just sits there at the boot from disc screen. I tried partitioning the HDD to 130GB. Ive also googled for some solutions but nothing has helped so i turn to the help of the experts.

11-18-2010, 07:26 AM	#2
SnipingCoward Join Date: Dec 2007 Posts: 2,328 Europe	Re: Windows XP Install If your system is too new, you might have to provide Windows XP with some needed drivers. This can happen when you are using SATA and have an old XP CD (e.g. before SP1). Post some specs please.
SnipingCoward Join Date: Dec 2007 Posts: 2,328 Europe	Got a PROBLEM? Check this: PR:BF2 Installation Guide Got a common QUESTION? check here first: PR:BF2 FAQ, MUMBLE FAQ "Hello, IT! ... Yes, have you tried turning it on and off again?"

11-18-2010, 03:37 PM	#3
xtremeqban Join Date: Mar 2009 Posts: 82 United States of America Location: Sarasota	Re: Windows XP Install Im not sure what what the cd had exactly on it.(got it from a teacher at school :P) As of specs 313GB Western Digital WDC WD3200AAJB-00J3A0 ATA Device (PATA) 512MB GeForce 7300 GT (BFG Tech) ASUSTeK Computer INC. Yale (CPU 1) 3.0GB Dual-Channel DDR @ 199MHz (3-3-3- MS Windows 7 Ultimate 32-bit This comp had xp on it...HP Pavilion a350n Desktop PC Product Specifications HP Pavilion a350n Desktop PC - HP Customer Care (United States - English)

11-18-2010, 05:46 PM	#4
SnipingCoward Join Date: Dec 2007 Posts: 2,328 Europe	Re: Windows XP Install If you did not clear the HDD off Win7 before installing XP chances the boot record got screwed. Are you prompted to select a Windows to boot? If so try Booting Win7 or boot from a Win7 install disc. Then when it boots hit F8 to get advanced options. Choose Startup Repair and follow the instructions. In cases like this I would resort to using a linux live CD, boot from that and use gParted to wipe and repartition drive.
SnipingCoward Join Date: Dec 2007 Posts: 2,328 Europe	Got a PROBLEM? Check this: PR:BF2 Installation Guide Got a common QUESTION? check here first: PR:BF2 FAQ, MUMBLE FAQ "Hello, IT! ... Yes, have you tried turning it on and off again?"

11-18-2010, 08:32 PM	#5
xtremeqban Join Date: Mar 2009 Posts: 82 United States of America Location: Sarasota	Re: Windows XP Install I formated the enitre HDD before i did and partitioned it and i then installed win 7 and the same error kept happening

11-18-2010, 08:41 PM	#6
SnipingCoward Join Date: Dec 2007 Posts: 2,328 Europe	Re: Windows XP Install Maybe the disc or it's files are corrupted. Else: since you are using IDE drives make sure your Master-Slave configuration is correctly set up (in BIOS & Driver's jumpers & cable's slot order matters too sometimes [esp. if using CS])
SnipingCoward Join Date: Dec 2007 Posts: 2,328 Europe	Got a PROBLEM? Check this: PR:BF2 Installation Guide Got a common QUESTION? check here first: PR:BF2 FAQ, MUMBLE FAQ "Hello, IT! ... Yes, have you tried turning it on and off again?"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode