project reality header
Go Back   Project Reality Forums > Project Reality Support > PR:BF2 Support
24 Jan 2022, 00:00:00 (PRT)
Register Developer Blogs Project Reality Members List Search Today's Posts Mark Forums Read
PR:BF2 Support Help and support regarding PR:BF2 installation and in-game issues

Reply
 
Thread Tools Display Modes
Old 2021-12-07, 00:12   #1
One-Zero

One-Zero's Avatar
Default Should I uninstall previous downloaded versions of BF2

Hello again after a long sabbatical of 13 years. To my joy, many issues are being addressed to make this run on Win10. However I have installed a downloaded version, still not working because of LOCERROR using my disc numbers.
Then I found PR: BF2, one of my favourite mods of the game. So I have D/L the 10GB 1.6.6.0 version and have it ready to go but...Should I remove the other version? it is not working and there are issues in the Documents area.
I don't want to end up with a whole heap of issues because of double entries and version types. I figure a clean install of one type is the best solution. Additionally, there are the benefits of the mods, maps and of course the non-vanilla gameplay.

This is a cut down version of the specs of the unit I am using for gameplay if it helps to understand what is what in the big scheme of things. Sorry, it is still long-winded but I was not sure how much more to delete without affecting the core values.

CPU-Z version 1.98.0.x64

Processors Information
-------------------------------------------------------------------------

Socket 1 ID = 0
Number of cores 4 (max 4)
Number of threads 8 (max
Manufacturer GenuineIntel
Name Intel Core i7 3610QM
Codename Ivy Bridge
Specification Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Package (platform ID) Socket 988B rPGA (0x4)
CPUID 6.A.9
Extended CPUID 6.3A
Core Stepping E1/L1
Technology 22 nm
TDP Limit 45.0 Watts
Tjmax 105.0 °C
Core Speed 3092.6 MHz
Multiplier x Bus Speed 31.0 x 99.8 MHz
Base frequency (cores) 99.8 MHz
Base frequency (ext.) 99.8 MHz
Stock frequency 2300 MHz
Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, EM64T, VT-x, AES, AVX
Microcode Revision 0x21
L1 Data cache 4 x 32 KB (8-way, 64-byte line)
L1 Instruction cache 4 x 32 KB (8-way, 64-byte line)
L2 cache 4 x 256 KB (8-way, 64-byte line)
L3 cache 6 MB (12-way, 64-byte line)
Max CPUID level 0000000Dh
Max CPUID ext. level 80000008h
FID/VID Control yes


Turbo Mode supported, enabled
Max non-turbo ratio 23x
Max turbo ratio 33x
Max efficiency ratio 12x
Min Power 36 Watts
O/C bins none
Ratio 1 core 33x
Ratio 2 cores 32x
Ratio 3 cores 31x
Ratio 4 cores 31x
TDP Level 45.0 W @ 23x

Clock Speed 0 3092.62 MHz (Core #0)
Clock Speed 1 3092.62 MHz (Core #1)
Clock Speed 2 3092.62 MHz (Core #2)
Clock Speed 3 3092.62 MHz (Core #3)
Core 0 max ratio 33.0 (effective 33.0)
Core 1 max ratio 33.0 (effective 33.0)
Core 2 max ratio 33.0 (effective 33.0)
Core 3 max ratio 33.0 (effective 33.0)

BIOS

UEFI Yes
BIOS Vendor American Megatrends Inc.
BIOS MSG 63-0100-000001-00101111-020612-Chipset
BIOS Date 02/06/12
Mainboard Vendor 000001

Chipset

Northbridge Intel Ivy Bridge rev. 09
Southbridge Intel HM76 rev. 04
Bus Specification PCI-Express 3.0 (8.0 GT/s)
Graphic Interface PCI-Express 1.0
PCI-E Link Width x16 (max 16x)
PCI-E Link Speed 2.5 GT/s (max 2.5 GT/s)
Memory Type DDR3
Memory Size 16 GBytes
Channels Dual
Memory Frequency 665.1 MHz (1:5)
CAS# latency (CL) 9.0
RAS# to CAS# delay (tRCD) 9
RAS# Precharge (tRP) 9
Cycle Time (tRAS) 24
Row Refresh Cycle Time (tRFC) 174
Command Rate (CR) 1T
Host Bridge 0x0154


Mainboard Model N76VM (0x0000015E - 0x0002AFD0)

Hardware Monitors

Hardware monitor Intel I/O
Clock Speed 0 349.17 MHz [0x15D] (Graphics)
Clock Speed 1 n.a. (Memory)
Clock Speed 2 n.a. (Processor)

Hardware monitor NVIDIA NVAPI
Clock Speed 0 135.00 MHz [0x87] (Graphics)
Clock Speed 1 405.00 MHz [0x195] (Memory)
Clock Speed 2 270.00 MHz [0x10E] (Processor)

SMBIOS Version 2.7

DMI BIOS
vendor American Megatrends Inc.
version N76VM.211
date 05/23/2012
ROM size 6144 KB

DMI System Information
manufacturer ASUSTeK COMPUTER INC.
product N76VM
version 1.0
serial C6N0AS467200250
UUID {28C2DE80-BB21-81E1-2707-3085A909C370}
SKU ASUS-NotebookSKU
family N

DMI Baseboard
vendor ASUSTeK COMPUTER INC.
model N76VM
revision 1.0
serial BSN12345678901234567

DMI System Enclosure
manufacturer ASUSTeK COMPUTER INC.
chassis type Notebook
chassis serial CSN12345678901234567

DMI Physical Memory Array
location Motherboard
usage System Memory
correction None
max capacity 32 GB
max# of devices 4

DMI Processor
manufacturer Intel(R) Corporation
model Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
clock speed 2300.0 MHz
FSB speed 100.0 MHz
multiplier 23.0x

DMI Memory Device
designation ChannelA-DIMM0
format SODIMM
type DDR3
total width 64 bits
data width 64 bits
size 8 GB
Storage

Drive 0
Device Path \\?\scsi#disk&ven_&prod_st1000lx015-1u71#4&220ad1&1&000000#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
Name ST1000LX015-1U7172
Revision SDM1
Serial WL1EMX15
Capacity 931.5 GB

Drive 1
Device Path \\?\scsi#disk&ven_&prod_st1000lm024_hn-m#4&220ad1&1&010000#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
Name ST1000LM024 HN-M101MBB
Revision 2AR10001
Serial S2TTJ9HC600368
Capacity 931.5 GB


Display adapter 1
ID 0x1060408
Name NVIDIA GeForce GT 630M
Board Manufacturer ASUSTeK Computer Inc.
Revision A1
Codename GF108
Core family 0xC1 (GF10
Cores 96
ROP Units 4
Technology 40 nm
Memory type DDR3 (Hynix)
Memory size 2 GB
Memory bus width 128 bits
PCI device bus 1 (0x1), device 0 (0x0), function 0 (0x0)
Vendor ID 0x10DE (0x1043)
Model ID 0x0DE9 (0x1477)
Revision ID 0xA1
Root device bus 0 (0x0), device 1 (0x1), function 0 (0x0)
Performance Level 2D Desktop
Core clock 660.0 MHz
Shader clock 1320.0 MHz
Memory clock 900.0 MHz
Performance Level 3D Applications
Core clock 800.0 MHz
Shader clock 1600.0 MHz
Memory clock 900.0 MHz
Performance Level Current
Core clock 135.0 MHz
Shader clock 270.0 MHz
Memory clock 405.0 MHz
Driver version 23.21.13.9135
WDDM Model 2.3
Win32_VideoController DriverDate = 08/06/2021

Monitor 0
Model ()
ID CMO1720
Serial
Manufacturing Date Week 2, Year 2011
Size 17.1 inches
Max Resolution 1920 x 1080 @ 60 Hz
Horizontal Freq. Range 0-0 kHz
Vertical Freq. Range 0-0 Hz
Max Pixel Clock 0 MHz
Gamma Factor 2.2


Software
Windows Version Microsoft Windows 10 (10.0) Home 64-bit (Build 19043)
DirectX Version 12.0
One-Zero is offline Reply With Quote
Old 2021-12-07, 06:42   #2
SemlerPDX
PR Server License Administrator

SemlerPDX's Avatar
Default Re: Should I uninstall previous downloaded versions of BF2

If you have an older version of Project Reality, uninstall it and then install the latest version.

PR is standalone, has not needed original BF2 game to be installed for quite some time, and iirc does not interfere with any BF2 folders so you could have both installed and running separately without issue.

As far as LOCERROR relating to BF2, again, not relevant to Project Reality so maybe check BF2 forums or info on that front.

SemlerPDX is offline Reply With Quote
Old 2021-12-07, 16:31   #3
[R-DEV]​AlonTavor
PR:BF2 Developer
Supporting Member
PR Server License Administrator
Default Re: Should I uninstall previous downloaded versions of BF2

New versions of PR likely don't conflict with anything. What issues are you having?
AlonTavor is offline Reply With Quote
Old 2021-12-08, 05:18   #4
One-Zero

One-Zero's Avatar
Default Re: Should I uninstall previous downloaded versions of BF2

Quote:
Originally Posted by AlonTavor View Post
New versions of PR likely don't conflict with anything. What issues are you having?
The issues are with the vanilla version and I get the LOCERROR. it is, as far as I know, to do with the My Documents changing to Documents. There may be more, but with M/soft updating the beejebus out of this thing, I don't know who has tested what on which version.

I haven't as yet started the install of PR until I heard back from the guys here. Being standalone makes it a great option, so I just need to read up on the install procedure or print it out so I can refer to it as I go along.
One-Zero is offline Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT. The time now is 09:47.