PDA

View Full Version : Update Project Reality: BF2 v1.4.1 Manual Update Required!


Mineral
2016-11-30, 20:40
http://media.realitymod.com/headers/prbf2_update.png

First of all, we hope v1.4 has been a fun to play update for our community, we as a team are very happy with what we accomplished in v1.4 and hope you are all enjoying it.


Project Reality:BF2 v1.4.1 and v1.4.2
We've prepared 2 hotfix patches to address some launch-day issues players and servers have been encountering. Since some of corrected issues pertain to the PR Launcher, which can't be applied through the automatic updater, the first patch v1.4.1 must be manually downloaded and installed. We have a issue with the updater so we can't use it to apply the patch. We will also be including a full standalone installer for 1.4.1 for new and returning players; refer to the Downloads and Installation section for further instructions.

Bear in mind that the 1.4.0 Launcher will NOT directly push this update to your system, so please alert any friends and fellow PR players and direct them to this page to receive the update.

The remaining bugfixes are in another patch v1.4.2 which can be downloaded through the launcher after v1.4.1 is installed.


v1.4.1.0 Changelog
This is the manual update Patch.


Fixed frequent CTD regarding graphic setting verification.
Fixed automated updater not working.


v1.4.2.0 Changelog

Fixed admin command !switch not working on dead players.
Fixed spam from bots and hash/name verification on COOP.
Fixed a server crash.
Fixed IDF Merkava front armor.
Fixed some breacher and spotter kits not being able to use shovel.
Fixed Milan MIRA having wrong materials.


Download & Installation
If you are new to Project Reality, visit the downloads page (http://www.realitymod.com/downloads#bf2) to download the standalone v1.4.1 installer.

If you have already installed PR:BF2 v1.4, visit the downloads page (http://www.realitymod.com/downloads#bf2) and download the Manual v1.4 to v1.4.1 Updater and run the executable.

Make sure the PR:BF2 installation path and operating system version(32/64bit) is correct before pressing 'Update'. If the patch was successful it will display 'Done'. Make sure to run it as admin and turn off your anti-virus.

Afterwards v1.4.2 can be automatically downloaded through the PR launcher as usual when you press "PLAY".

If you have already installed PR:BF2 v1.3.9 or a previous release, uninstall PR:BF2 and visit the downloads page (http://www.realitymod.com/downloads#bf2) to download the standalone v1.4.1 installer.

You can find the detailed PR Installation Guide right here (http://www.realitymod.com/forum/f27-pr-bf2-support/99834-project-reality-bf2-installation-guide.html).

Project Reality Mod Support
If you encounter any problems while installing and/or playing Project Reality: BF2, please check out the Project Reality Mod Support forum (http://www.realitymod.com/forum/forumdisplay.php?f=357). If your problem has not already been posted by someone else, please do not hesitate to start a new thread asking for help.

Support Project Reality!
The Project Reality Team develops this modification completely free of charge for its community to download and play. If you would like to show your support, please consider donating (http://www.realitymod.com/donate) to our team. These funds go directly towards website expenses, including bandwidth, hosting, domain registration, and maintenance. We never use donation funds to directly pay team members.

http://media.realitymod.com/promo/pr_donate_banner_500x92.png (http://www.realitymod.com/donate)


For more information, please feel free to join us on our IRC channel (http://www.realitymod.com/irc) or visit our public forums (http://www.realitymod.com/forum) to discuss this and other news. Also, be sure to connect to Project Reality through social media to stay informed and receive up to the minute updates, the occasional leaked bit of information, and more! See you on the battlefield!

http://media.realitymod.com/news/smicons/facebook.png (http://www.facebook.com/realitymod) http://media.realitymod.com/news/smicons/moddb.png (http://www.moddb.com/mods/project-reality) http://media.realitymod.com/news/smicons/twitter.png (http://twitter.com/realitymod) http://media.realitymod.com/news/smicons/feed.png (http://www.realitymod.com/rss)


- The Project Reality Team

MisTyK
2016-11-30, 20:49
Thanks, but now all my team got the "empty server browser".

Don't know if that happen to all players (were on 1.4.2)


edit: maybe because servers are not up to date?

Mineral
2016-11-30, 20:55
Servers likely not updated yet.

LiamBai
2016-11-30, 20:58
Servers are also updating. This can take time depending on when the server admins have time.
There should be some servers up very shortly.

Omarito
2016-11-30, 21:13
Updater indicates that i dont have 1.4 lol but i have it what should i do ?

System Information
------------------
Operating System: Microsoft Windows 7 Professionnel (6.1.7601)
Architecture: 32 bits
Current Culture: French (France)
Motherboard: ECS G31T-M7
Processor: Pentium(R) Dual-Core CPU E5300 @ 2.60GHz (Physical: 2, Logical: 2)
Memory: 3,00 GB
Page File: 3,00 GB
.NET Framework: Unknown

Display Information
-------------------
Display Device(s): Moniteur Plug-and-Play g?n?rique on NVIDIA GeForce 210
Display Mode(s): 1440 x 900 (32 bit) @ 60 Hz
Driver Version: 9.18.13.4195 (341.95)
Display Memory: 1024,00 MB
Multisampling: 2, 4, 8
DPI: 96 (100%)

Audio Information
-----------------
Primary Playback: Haut-parleurs (2- USB PnP Sound
Primary Recording: Microphone (2- USB PnP Sound De
Open AL Renderer: Software
EAX: True
EAX 1.0: False
EAX 2.0: True
EAX 3.0: False
EAX 4.0: False
EAX 5.0: False
X-RAM: False

Disk Information
----------------
Install Path: E:\Project Reality\Project Reality BF2
Free: 36,83 GB, Total: 206,97 GB, FS: NTFS, SSD: False
Mod Path: E:\Project Reality\Project Reality BF2\mods\pr
Free: 36,83 GB, Total: 206,97 GB, FS: NTFS, SSD: False
Profiles Path: C:\Users\MED\Documents\ProjectReality\Profiles
Free: 37,47 GB, Total: 63,38 GB, FS: NTFS, SSD: False
Update DL Path: C:\Users\MED\AppData\Local\Project Reality\Project Reality BF2\Downloads
Free: 37,47 GB, Total: 63,38 GB, FS: NTFS, SSD: False
Update Log Path: C:\Users\MED\AppData\Local\Project Reality\Project Reality BF2\UpdateLogs
Free: 37,47 GB, Total: 63,38 GB, FS: NTFS, SSD: False

Game Information
----------------
Installed Mods: pr
Current Mod: pr
Version: 1.4.0.0
PR Version: 1.4.1.0
Language: english
Debug Available: False
Large Address: True
Supported Hardware: None

Profile Information
-------------------
Profile 0001: TW|GOAOmarito_XD
Type: Online
Last Used Profile: True
View Intro: True
Fullscreen: True
Display Mode: 1440x900@60Hz
Display Mode Valid: True
Graphics Scheme: Medium
Multisampling: Off
VSync: False
Terrain Quality: Low
Effects Quality: Low
Geometry Quality: Low
Texture Quality: Medium
Lighting Quality: Low
Dynamic Shadows: Medium
Dynamic Lights: Medium
Texture Filtering: Medium
Audio Provider: Software
Provider Valid: True
Audio Quality: Medium
EAX: True

Profile 0002: TW|GOAOmarito
Type: Online
View Intro: True
Fullscreen: True
Display Mode:
Display Mode Valid: False
Graphics Scheme: Custom
Multisampling: Off
VSync: False
Terrain Quality: Low
Effects Quality: Low
Geometry Quality: Low
Texture Quality: Medium
Lighting Quality: Low
Dynamic Shadows: Off
Dynamic Lights: Off
Texture Filtering: Medium
Audio Provider: Software
Provider Valid: True
Audio Quality: Medium
EAX: True

AlonTavor
2016-11-30, 21:15
Updater indicates that i dont have 1.4 lol but i have it what should i do ?

Did the textbox show the correct path to the launcher?
Did you somehow click twice?
Did you select 32bit/64bit?

Try launching and see what happens.

Rezza
2016-11-30, 21:17
Thanks for the update before the weekend that's well planned and thought out. We have to spread word about the manual update though. Please share it everywhere!

Omarito
2016-11-30, 21:21
AlonTavor;2151006']Did the textbox show the correct path to the launcher?
Did you somehow click twice?
Did you select 32bit/64bit?

Try launching and see what happens.

I didnt click twice but i hav e tried the automated updater first since i didnt know the update should be done manually

althought i still have this :

ERROR : version is not 1.4.0.0

ghostfool84
2016-11-30, 21:39
Avast shows Virus with manual 1.4.1 Patch

http://i.imgur.com/ovIRYxC.jpg

Mineral
2016-11-30, 21:46
Mineral;2150995']
Make sure the PR:BF2 installation path and operating system version(32/64bit) is correct before pressing 'Update'. If the patch was successful it will display 'Done'. Make sure to run it as admin and turn off your anti-virus.

The program is signed. Just disable your anti-virus while applying the patch. It's probably because it wants to alter files.

ghostfool84
2016-11-30, 21:58
Oh, didnt read that line..., should be maybe red too. Anyway thanks for the hotfixes.

captainfuture
2016-11-30, 22:02
Thanks again! MUCHAS SMOOCHES TO THE DEVS!

[KSK]Eichhoernsche
2016-11-30, 22:04
Avast shows Virus with manual 1.4.1 Patch

http://i.imgur.com/ovIRYxC.jpg

Wohoo Ghost is going to play PR again. Finally got rid of rainbow? ;)
And: THX devs

LiamNL
2016-11-30, 22:08
Don't know if this is performance related but after installing this patch I played a round of Fallujah and for some reason the run animation would bug out and stutter and accelerate weirdly whilst not moving forward fluently. This would also happen when I jumped over a barrier and the jumping animation would keep playing on my gun whilst walking.

Also whilst still in 1.4.0.0 I was attempting to fly a blackhawk on bamyan but crashed due to my game suddenly running at 1 frame per second which is strange as during the test event I had no such problems, and most other maps run perfectly fine on my rig.

Omarito
2016-11-30, 22:15
what about my problem guys ?? :'( :/

GPnWhiskey
2016-11-30, 22:33
Worked seamless for me, thanks for the easy instructions.

AlonTavor
2016-11-30, 22:34
what about my problem guys ?? :'( :/

You're already at 1.4.1. Even your logs say so. Just launch the game.

Omarito
2016-11-30, 22:39
AlonTavor;2151025']You're already at 1.4.1. Even your logs say so. Just launch the game.

Solved thank you so much ;:D

DogACTUAL
2016-11-30, 22:39
Somehow when i start the game from the launcher it says there is an update available and gives me the option to download it, should i?

LiamBai
2016-11-30, 23:37
Somehow when i start the game from the launcher it says there is an update available and gives me the option to download it, should i?
It'll give you an error and do nothing, so feel free. :D
Once you've updated 1.4.1 use the launcher again and it'll bring you to 1.4.2.

J0HNNY5
2016-11-30, 23:56
Hello... I get this message when i try to update: 1221: Unable to obtain an update list.

What can i do? Thanks

kinglespringles
2016-12-01, 00:06
friends and myself getting unable to update error as well.

edit: oh actually read the post.

AlbiK
2016-12-01, 00:28
Hello... I get this message when i try to update: 1221: Unable to obtain an update list.

What can i do? Thanks

Hello, :the first patch v1.4.1 must be manually downloaded and installed. You can download it from here http://www.realitymod.com/downloads#bf2.

Make sure the PR:BF2 installation path and operating system version(32/64bit) is correct before pressing 'Update'. If the patch was successful it will display 'Done'. Make sure to run it as admin and turn off your anti-virus.
After you're done, patch v1.4.2 can be automatically downloaded through the PR launcher as usual when you press "PLAY".

TBoy205
2016-12-01, 00:41
Make sure the PR:BF2 installation path and operating system version(32/64bit) is correct before pressing 'Update'. is there even a 64 bit version of PR?

GalBaTroS
2016-12-01, 08:51
Thanks to the DEVS for keeping such an Epic (game) ..er... EXPERIENCE alive.. i see so many new comers and love helping them.. usually starts with : 'How do i use the radio'

I look 4wrd to enjoying this for many years to come and then some

I do miss the intro music tho, its so fitting to the whole beast that PR is.. the new Bamyan music is spot on PR...

Thanks again to the devs and the admins. i hope you pass your skills onto your offspring so this train never stops rolling

AfterDune
2016-12-01, 08:53
is there even a 64 bit version of PR?
No, but the launcher is either 32- or 64-bit.

SHADOWNET
2016-12-01, 10:38
AfterDune;2151089']No, but the launcher is either 32- or 64-bit.

is it possible to make like a 64 bit version of PRBF2.exe, would that improve the performance or w/e?

thanks.

Rhino
2016-12-01, 10:54
is it possible to make like a 64 bit version of PRBF2.exe, would that improve the performance or w/e?

thanks.

no.



.

SHADOWNET
2016-12-01, 10:58
Rhino;2151105']no.



.

ah, i see.
well, thanks anyway.

Westfy
2016-12-01, 13:25
Soon enough you devs will add the patch to the main PR downloader & updater? Im not interested to download and install it manually because it seems a little bug!

4drian96
2016-12-01, 13:27
When i try to install patch 1.4.0 to 1.4.1 i have a error "failed to copy files" ???

Ason
2016-12-01, 13:28
When i try to install patch 1.4.0 to 1.4.1 i have a error "failed to copy files" ???

I believe running it as admin will solve that, not entirely sure though.

Correa
2016-12-01, 14:44
Hello i have this problem .. i really dont know what to do i tryed download that again reinstal ... just cant start that Patch https://cdn.discordapp.com/attachments/253882737641914369/253891540609531905/jpg.png
and running that as admin doesnt work too

Westfy
2016-12-01, 15:09
Ason;2151127']I believe running it as admin will solve that, not entirely sure though.

Will you devs add the patch to the main PR downloader & updater? Im not interested to download and install it manually because it seems a little bug and hard to apply !!

AlbiK
2016-12-01, 15:14
Hello i have this problem .. i really dont know what to do i tryed download that again reinstal ... just cant start that Patch https://cdn.discordapp.com/attachments/253882737641914369/253891540609531905/jpg.png
and running that as admin doesnt work too

You have to close the PR launcher when you update from 1.4 to 1.4.1

Mineral
2016-12-01, 15:14
Did you read the announcement?

RaNa-xXx1
2016-12-01, 15:25
I don't think so Boss so many new people read the announcement
we lost many's new players. can you please do something like automatic update 1.4.1 and after that automatic update to 1.4.2

Correa
2016-12-01, 15:58
You have to close the PR launcher when you update from 1.4 to 1.4.1

Thanks !

GalBaTroS
2016-12-01, 16:11
FAILED TO COPY FILES... i had that too.... then i had a revelation.... i closed the launcher and did it again...

it worked

it would not replace files for launcher with it open you see... (du?!:?)

im sure u figured that out already tho

Mineral
2016-12-01, 17:00
I don't think so Boss so many new people read the announcement
we lost many's new players. can you please do something like automatic update 1.4.1 and after that automatic update to 1.4.2
Again, did you manage to read announcement or did you close both your eyes? Do you think we made manual update for fun?

TBoy205
2016-12-01, 22:23
Again, did you manage to read announcement or did you close both your eyes? Do you think we made manual update for fun?

IMO this is a good moron filter. :)

LiamBai
2016-12-01, 23:20
Soon enough you devs will add the patch to the main PR downloader & updater?
Nope. It's manual because this is impossible.

Nevin
2016-12-02, 11:22
Downloading PR v1.4.2 with average of 20kb/s with torrent, SAVE MEHHHH

TaNGoDK
2016-12-02, 14:03
Hey I have had this Problem since 1.4 and now on 1.4.2 when i join it says Failed to connect Check your connection(s) and try again i have tryed soo many other opitions like turning firewall off anti-virus off and run as admin even reinstalled Punkbuster and other things i really hope you guys can help me.


.....Tango.....

Guardian[]B()b
2016-12-03, 01:55
IMO this is a good moron filter. :)

Alas this is human nature. Mineral is giving patient bear a run for his money at this point I think ;)


Close your PR Launcher
Download the v1.4.1 patch
Right click the file: Run as Administrator
It located my PR in the correct folder, and update
Run the PR launcher.


You can read it - you can do it!

Blaze_02
2016-12-03, 04:22
Will the devs keep doing manual update for every patch?

The situation is: I like to play online but I also like to play local in our laptops with my friends who isn't familiar with PR. So I kind of need to introduce them to it but they don't have the luxury of internet (yet) and it would be great if I can download patches manually for their client to update so that I still can play coop locals with them and online alone.

PS: We usually share our internet for when we play coop local.

fpspromotion
2016-12-03, 22:40
Will the devs keep doing manual update for every patch?

The situation is: I like to play online but I also like to play local in our laptops with my friends who isn't familiar with PR. So I kind of need to introduce them to it but they don't have the luxury of internet (yet) and it would be great if I can download patches manually for their client to update so that I still can play coop locals with them and online alone.

PS: We usually share our internet for when we play coop local.
i posted this on similar question, this is updated Version


http://www.realitymod.com/forum/f10-pr-bf2-general-discussion/143258-download-1-3-9-0-offline-lan.html
i posted this on similar question, this is updated Version 12,2015 version1,42



How to install without internetconnection on LAN:
I. Goto download full 1.41 Version Downloads | Project Reality

Its a big 7 Gigabyte file download

II. Download Splitter Software from HJSplit for Windows
use hjssplit Software to split the 7 giga installer into 3 parts


because DVD size is 4 giga only

now there are 3 possibities

1. IF you have portable USB harddisk: Copy the 3 splitted files of the

Project reality installer 1.41 in a portable USB harddisk,

if you can copy the 7 Gigabyte full installer the do it, i could not copy there is alimit of 7 giga for files to copy in some hardisks ( win 7 home 64 bit)

TIP: also copy on usb harddisk: the hjs split Software and the Project reality Manual


2.other possiblity : burn the 3 parts on DVDs

TIP: also burn on DVD the hjs split Software and the Project reality

Manual

3. at the LAN use hjssplit Software from USB portable harddisk or dvd
to copy the parts to the pc to install it

4. Use HJSPLIT to join the 3 parts in to the pr installer ( 7 Gigabyte)
5. install on every PC,



6 if you want to install last update Version you still Need Internet, i found

not other way
current Version ist 1.42,
online you can only Play with 1.42 updated Version

before updating to 1.42 check to have market in Options" Keep update files" so you can copy them to other Computers in the update folder

if someone has more tips or corrections for this guide feel free to add


other tips from other users
If one of the pc's sets up a share, the rest can copy the installer from there. Splitting stuff up isn't needed then. Or simply use a large enough usb stick .

Hmm, I *think* that if you download the individual patches, you can simply run them individually, as they are opened by the updater?

fpspromotion
2016-12-03, 22:43
Hey I have had this Problem since 1.4 and now on 1.4.2 when i join it says Failed to connect Check your connection(s) and try again i have tryed soo many other opitions like turning firewall off anti-virus off and run as admin even reinstalled Punkbuster and other things i really hope you guys can help me.


.....Tango.....

Download & Installation
If you are new to Project Reality, visit the downloads page to download the standalone v1.4.1 installer.

If you have already installed PR:BF2 v1.4, visit the downloads page and download the Manual v1.4 to v1.4.1 Updater and run the executable.

Make sure the PR:BF2 installation path and operating system version(32/64bit) is correct before pressing 'Update'. If the patch was successful it will display 'Done'. Make sure to run it as admin and turn off your anti-virus.

Afterwards v1.4.2 can be automatically downloaded through the PR launcher as usual when you press "PLAY".

If you have already installed PR:BF2 v1.3.9 or a previous release, uninstall PR:BF2 and visit the downloads page to download the standalone v1.4.1 installer.

You can find the detailed PR Installation Guide right here. http://www.realitymod.com/forum/f27-pr-bf2-support/99834-project-reality-bf2-installation-guide.html

Mineral
2016-12-03, 23:15
This was a one time thing of manual update. We didn't want to do it but there was no other way. Next updates will be with auto updater.

Rotblut
2016-12-04, 22:11
[EJE#ES]_Martin just posted the outcome of the new PR 1.4 release on the VG forum. Thankfull I download now with 666KB/s ;) Awesome job! Can`t wait to play.

Gbossley
2016-12-05, 02:41
Coop Local won't load? I've tried on Bamyan (sp?) what a fantastic map on first look yesterday. Also tried Beirut that I've used successfully recently. No dice, PR closes on attempt to load.

MrGoaty
2016-12-06, 08:53
Everytime I Click on the Check For Updates And clicking update it saids Unable To Obtain An Update List What Should i Do? :(

Mineral
2016-12-06, 09:12
Read the thread

Sgt.BountyOrig
2016-12-07, 12:06
Mineral;2151162']Do you think we made manual update for fun?

No, we just think you're bad at software

Rezza
2016-12-07, 16:26
These guys spend their free time on this product for free and still deliver content and service better than most AAA studios and you guys are being hard on them? What is wrong with the world. This is literally candy for free.

robert357
2016-12-08, 15:55
No, we just think you're bad at software

We? I think only you think in that way.

a3dboy1
2016-12-08, 22:53
I actually had no problems with manual patch. Hell, back in 2009 there were no such thing as launcher/automatic updates and everyone could update their Project Reality and other mods just fine.

Seriously, since when humanity became this dumb that downloading and applying 9MB patch is some kind of woodoo? I am actually satisfied that many idiots who can't manually update their PR client will not be seen anymore on the servers.

Ghost Assassin
2016-12-12, 07:24
Everytime I Click on the Check For Updates And clicking update it saids Unable To Obtain An Update List What Should i Do? :(

Launch Project Reality menu and click on support. In the upper right corner it will tell you what version of the game you have. If you already have v1.4.0 installed, you can just go to the downloads section on this website and download the manual update. It should update to 1.4.1. Afterwards, launch project reality again and check for updates. My current version installed is 1.4.3.

SHADOWNET
2016-12-12, 18:35
IMO this is a good moron filter. :)

this is now my sig lol.

Rotblut
2016-12-13, 10:50
These guys spend their free time on this product for free and still deliver content and service better than most AAA studios and you guys are being hard on them? What is wrong with the world. This is literally candy for free.
My mom said.
Do not take free candy from anyone. Well, here I did and I am satisfied. Hmmm taste good:lol:

Roque_THE_GAMER
2016-12-16, 21:32
Since 1.4 this is happen.

http://imgur.com/kRQX8JZ
http://imgur.com/kRQX8JZ

Rotblut
2016-12-17, 10:52
Since 1.4 this is happen.

Imgur: The most awesome images on the Internet (http://imgur.com/kRQX8JZ)
http://imgur.com/kRQX8JZ
Sorry i cant into English...

Ha um relatorio: http://www.realitymod.com/forum/f27-pr-bf2-support/124694-error-1301-a-5.html. Tambem DNS mudar para 8.8.4.4. e uma boa ajuda

tacticalhulk
2016-12-17, 15:57
Could anyone help me I have prbf2 version 1.3.5 and when I try to update it says unable to obtain update list

Rotblut
2016-12-17, 16:13
Could anyone help me I have prbf2 version 1.3.5 and when I try to update it says unable to obtain update list

http://www.realitymod.com/forum/f380-project-reality-news/143434-project-reality-bf2-v1-4-released.html

Unfortunately because of the version, you have to download the whole installer. look at the link above

tacticalhulk
2016-12-17, 16:16
Thanks I was so worried something bad had happened

Roque_THE_GAMER
2016-12-17, 17:19
Ha um relatorio: http://www.realitymod.com/forum/f27-pr-bf2-support/124694-error-1301-a-5.html. Tambem DNS mudar para 8.8.4.4. e uma boa ajuda

Danke!!!

tacticalhulk
2016-12-22, 14:38
I updated to 1.4.3 but I can't find the Falklands map anywhere

tacticalhulk
2016-12-22, 14:40
:( :( :( :( :( :(

Mineral
2016-12-22, 14:56
it doesn't have coop, only online :s

Aiguna
2016-12-29, 23:24
I'm having an issue updating from 1.4 to 1.4.1

i have version 1.4 currently installed.

i downloaded the patch 1.4 to 1.4.1.

i switch off Avast then run patch as administrator.

i choose correct root and try both 64 and 32 but it keeps saying that i dont have 1.4 currently installed.

http://content.screencast.com/users/Aiguna/folders/Jing/media/7bfb4b16-aa5b-422f-aa88-3a4ba3b901e4/2016-12-30_0017.png

help :)

Mineral
2016-12-30, 01:07
Open your pr launcher, go to support, then click the copy to clipboard option and copy paste it here.

Aiguna
2016-12-30, 01:19
System Information
------------------
Operating System: ?????????? Windows 10 Pro (Registered Trademark) (10.0.14393)
Architecture: 64-?????????
Current Culture: Russian (Russia)
Motherboard: Gigabyte Technology Co., Ltd. EP35-DS3
Processor: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz (Physical: 4, Logical: 4)
Memory: 6,00 GB
DIMM Modules: A0: 2,00 GB @ 800 MHz
A1: 2,00 GB @ 800 MHz
A2: 2,00 GB @ 800 MHz
Page File: 10,92 GB
.NET Framework: 4.6+ Release Build: 394802, Runtime: 4.0.30319.42000

Display Information
-------------------
Display Device(s): Dell U2410(Digital) on NVIDIA GeForce 9600 GT
Display Mode(s): 1920 x 1200 (32 bit) @ 59 Hz
Driver Version: 21.21.13.4201 (342.01)
Display Memory: 512,00 MB
Multisampling: 2, 4, 8
DPI: 96 (100%)

Audio Information
-----------------
Primary Playback: ???????? (Realtek High Definiti
Primary Recording: ???????? (USB Microphone)
Open AL Renderer: Software
EAX: True
EAX 1.0: False
EAX 2.0: True
EAX 3.0: False
EAX 4.0: False
EAX 5.0: False
X-RAM: False

Disk Information
----------------
Install Path: D:\project reality222
Free: 172,58 GB, Total: 749,87 GB, FS: NTFS, SSD: False
Mod Path: D:\project reality222\mods\pr
Free: 172,58 GB, Total: 749,87 GB, FS: NTFS, SSD: False
Profiles Path: C:\Users\User\Documents\ProjectReality\Profiles
Free: 80,92 GB, Total: 181,10 GB, FS: NTFS, SSD: False
Update DL Path: C:\Users\User\AppData\Local\Project Reality\Project Reality BF2\Downloads
Free: 80,92 GB, Total: 181,10 GB, FS: NTFS, SSD: False
Update Log Path: C:\Users\User\AppData\Local\Project Reality\Project Reality BF2\UpdateLogs
Free: 80,92 GB, Total: 181,10 GB, FS: NTFS, SSD: False

Game Information
----------------
Installed Mods: pr
Current Mod: pr
Version: Standalone - 1.0
PR Version: 1.3.9.0
Language: english
Debug Available: False
Large Address: True
Supported Hardware: None

Profile Information
-------------------
Profile 0001: Aiguna
Type: Online
Last Used Profile: True
View Intro: True
Fullscreen: True
Display Mode: 1920x1200@60Hz
Display Mode Valid: True
Graphics Scheme: Custom
Multisampling: Off
VSync: False
Terrain Quality: High
Effects Quality: High
Geometry Quality: High
Texture Quality: Medium
Lighting Quality: High
Dynamic Shadows: Medium
Dynamic Lights: Medium
Texture Filtering: Medium
Audio Provider: Software
Provider Valid: True
Audio Quality: Low
EAX: True

Mineral
2016-12-30, 01:28
PR Version: 1.3.9.0

You are on v1.3.9.0. You will have to download v1.4.1.0 completely as it says in the first post of this thread.

sorrowsnow
2017-01-09, 01:37
why is the main file download link of google drive not there anymore?

SucharMistrz
2017-01-10, 18:16
You can find download link f. e. on DPRC.

-=BB=-Sodom
2017-01-10, 18:57
You can find download link f. e. on DPRC.

the link from dprc sends u back to the project reality download section.
i need a dl mirror for my friends... any links?

SucharMistrz
2017-01-10, 21:25
the link from dprc sends u back to the project reality download section.
i need a dl mirror for my friends... any links?

LOL

https://s23.postimg.org/mj2tlf26j/image.png

https://drive.google.com/file/d/0B-M1JZ9L_rWiYXNvZnZELWg2LUk/edit

https://www.dprc-servers.com/t400f34-Installations-Guid.html

-=BB=-Sodom
2017-01-11, 12:37
LOL

https://s23.postimg.org/mj2tlf26j/image.png

https://drive.google.com/file/d/0B-M1JZ9L_rWiYXNvZnZELWg2LUk/edit

https://www.dprc-servers.com/t400f34-Installations-Guid.html

i was looking here https://www.dprc-servers.com/t399f34-Project-Reality-Download-Link.htm
btw thx for the help

SucharMistrz
2017-01-11, 16:03
i was looking here https://www.dprc-servers.com/t399f34-Project-Reality-Download-Link.htm
btw thx for the help

Your link is broken but I know what you mean.
I dont really know why it is in 'installations guid'...

Rotblut
2017-01-12, 16:37
I have just tryed the Downloads | Project Reality (http://www.realitymod.com/downloads) . The torrent is working perfect and 1000+ Peps are seeding. Why you try to download from a other Site then this here?

JSmodified
2017-02-15, 03:23
...^_^...

NealieGotcha
2017-02-21, 03:15
I installed the complete new .iso installed it, clicked update from launcher and then it updated from 1.4.1 all the way to 1.4.5 and still no dice with regards to CTD after launch.. what am i doing wrong.. at what stage can i use the manual update if it cant find 1.4.00 to begin with !

NealieGotcha
2017-02-21, 03:17
System Information
------------------
Operating System: Microsoft Windows 10 Pro (10.0.14393)
Architecture: 64-bit
Current Culture: English (United States)
Motherboard: Gigabyte Technology Co., Ltd. Z68X-UD4-B3
Processor: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz (Physical: 4, Logical: 4)
Memory: 8.00 GB
DIMM Modules: A2: 4.00 GB @ 1600 MHz
A3: 4.00 GB @ 1600 MHz
Page File: 8.00 GB
.NET Framework: 4.6+ Release Build: 394802, Runtime: 4.0.30319.42000

Display Information
-------------------
Display Device(s): Generic PnP Monitor on NVIDIA GeForce GTX 680
Display Mode(s): 1920 x 1080 (32 bit) @ 60 Hz
Driver Version: 21.21.13.7866 (378.66)
Display Memory: 2.00 GB
Multisampling: 2, 4, 8
DPI: 96 (100%)

Audio Information
-----------------
Primary Playback: Speakers (4- Corsair Vengeance
Primary Recording: Microphone (4- Corsair Vengeanc
Open AL Renderer: Software
EAX: True
EAX 1.0: False
EAX 2.0: True
EAX 3.0: False
EAX 4.0: False
EAX 5.0: False
X-RAM: False

Disk Information
----------------
Install Path: C:\Program Files (x86)\Project Reality\Project Reality BF2
Free: 30.08 GB, Total: 111.25 GB, FS: NTFS, SSD: True
Mod Path: C:\Program Files (x86)\Project Reality\Project Reality BF2\mods\pr
Free: 30.08 GB, Total: 111.25 GB, FS: NTFS, SSD: True
Profiles Path: C:\Users\Chris\Documents\ProjectReality\Profiles
Free: 30.08 GB, Total: 111.25 GB, FS: NTFS, SSD: True
Update DL Path: C:\Users\Chris\AppData\Local\Project Reality\Project Reality BF2\Downloads
Free: 30.08 GB, Total: 111.25 GB, FS: NTFS, SSD: True
Update Log Path: C:\Users\Chris\AppData\Local\Project Reality\Project Reality BF2\UpdateLogs
Free: 30.08 GB, Total: 111.25 GB, FS: NTFS, SSD: True

Game Information
----------------
Installed Mods: pr
Current Mod: pr
Version: Standalone - 1.0
PR Version: 1.4.5.0
Language: english
Debug Available: False
Large Address: True
Supported Hardware: None

Profile Information
-------------------
Profile 0001: Chrisso06
Type: Online
View Intro: True
Fullscreen: True
Display Mode: 1920x1080@60Hz
Display Mode Valid: True
Graphics Scheme: Medium
Multisampling: Off
VSync: False
NoLods: False
Terrain Quality: Low
Effects Quality: Low
Geometry Quality: Low
Texture Quality: Medium
Lighting Quality: Low
Dynamic Shadows: Medium
Dynamic Lights: Medium
Texture Filtering: Medium
Audio Provider: Software
Provider Valid: True
Audio Quality: Medium
EAX: True

NealieGotcha
2017-02-22, 00:05
Can ANYONE please help me !

how can i manually update from 1.4.0 to 1.4.1 when the ISO releases and installs at 1.4.1 .... then automatiocally upadates to 1.4..5

Max_
2017-02-22, 00:42
Can ANYONE please help me !

how can i manually update from 1.4.0 to 1.4.1 when the ISO releases and installs at 1.4.1 .... then automatiocally upadates to 1.4..5

1.4.5 is the latest version at the moment, so it is totally normal for the launcher to automatically update your game after applying the manual update.

HIROhd
2017-04-13, 19:13
new map = CTD for me

edit: CTD stops, now ok

Max_
2017-04-13, 22:25
new map = CTD for me

Does it give an error message if you run in windowed mode?
If so, take a screenshot of it.

chiderao
2017-04-14, 17:38
i would love to see map for the current insurgency in Nigeria,,i'm Nigerian
would be like Nigerian Army vs Bokoharam

those Muslims killing themselves

fpspromotion
2017-04-15, 19:41
i would love to see map for the current insurgency in Nigeria,,i'm Nigerian
would be like Nigerian Army vs Bokoharam

those Muslims killing themselves
you need install www. battlelog.co bf2 revive included special forces

and download mod ivory coast conflict mod
ivory coast was an african war to oust ivory coast president by un forces and forces o neighbour countries

i got it from moddb but i dont know if its online know :P
BF2 + ENB + Ivory Coast Conflict mod 2016
BF2 SP Freak on weed



youtube video link

35 minute video about this mod
http://www.youtube.com/watch?v=Y6oG74NGyA8

a short video of this mod
http://www.youtube.com/watch?v=6eWBBsGVdBg

sapper1893
2017-04-23, 19:02
Ok, I've just done the update and now when I try to run PR I get the following message come on up on screen:

"59: update failed. The required version for this update does not match the installed version. Installed Repo, Required 1.4.70"

Mine is the latest version as I have done all the updates as they come up on PR. Can someone help. Been away from PR for 2 days now due to family visits. I've just completed this update and get this error message. Withdrawal symptoms already

Max_
2017-04-23, 19:12
Please use the support forum. When posted in random thread the might or not be an answer to your question.

Did some research in the support forum about the Error 59. It seems that your client is broken somehow and to fix that you will need to reinstall v1.4.1 and update it to v1.4.8 one by one.

Sorry for the inconvenience. If you have more issue feel free to create a thread in the support forum.

PR:BF2 Support - Project Reality Forums (http://www.realitymod.com/forum/f27-pr-bf2-support)

sapper1893
2017-04-23, 20:04
Max_;2162280']Please use the support forum. When posted in random thread the might or not be an answer to your question.

Did some research in the support forum about the Error 59. It seems that your client is broken somehow and to fix that you will need to reinstall v1.4.1 and update it to v1.4.8 one by one.

Sorry for the inconvenience. If you have more issue feel free to create a thread in the support forum.

PR:BF2 Support - Project Reality Forums (http://www.realitymod.com/forum/f27-pr-bf2-support)

Yeh thanks for that, I was kind of guessing that would the only option as I can't get into PR to do anything else. If I re-install I am assuming all the updates will be on the new install.
Right or wrong and if wrong why. I would have expected the new install would be updated as and when updates are introduced.

sapper1893
2017-04-23, 23:01
Problem solved. Had to do a complete re-install :sad:

HeadlessChicken86
2017-06-03, 23:56
Best gaem, thank you DEVs for sacrificing your precious time. Best DEVs. Wow.

VIRK
2017-06-11, 08:25
hello there! guy's i want to complain about the new update patch and its implications on the sniper rifle. It not once now but many times that i have seen this. even if u shoot an enemy in his face he won't die. That is not it one bullet. it takes 2 bullets!!!! I'm a veteran and the effects u had before for sniper rifle were realistic in the aspect that a sniper shoot from within the range parameter of the rifle is always one shot one kill. ive lost my buddies to it. Dragonove firing at u from 600 meters on the torso., its slices the body armor like butter. i would plz urge u to look into the matter and correct it plz.
at least its effect should be lethal in the arc of the weapons effective range.
THANKS

RebbEsc
2017-07-02, 23:18
Everything is great but can you return the low settings in the effects? I know you can barely see through smokes but i played smooth gameplay before now its laggy depends on the map, dont tell me to get new hardware just dont please.

WeeGeez
2017-07-24, 09:06
Is it true graphics settings are forced now? It seems textures don't look as good for some reason on some maps...

Max_
2017-07-24, 09:34
Only effects are forced to High because of BF2 engine bug that can't renderer Smoke at some distance with low configuration, which resulted to admins thinking that there was an hacker playing when there wasn't one and the player gaining over the top advantage.

The rest of the settings remains untouched.

cry{hav0c)
2017-07-25, 01:50
Hi all,

Complete noob to PR. I downloaded the torrent of the install iso and it is corrupted no matter what program I use to extract it. Any ideas? I tried the stand alone download and it wouldn't even finish. I'm at a loss here...

EDIT: Found the Google Drive link, gonna try that.

Daytrader
2017-08-01, 20:12
Is it true graphics settings are forced now? It seems textures don't look as good for some reason on some maps...

Well the textures are deffo lower now, i have game maxed out as well, quality know where near as good now.

SucharMistrz
2017-08-01, 21:38
Is it true graphics settings are forced now? It seems textures don't look as good for some reason on some maps...


GENERAL:

Removed option to change effects settings. They are forced to High now.

Effects =/= textures

lmao

WeeGeez
2017-08-09, 12:42
I'm not talking about smoke and effect, just textures specifically.

Well the textures are deffo lower now, i have game maxed out as well, quality know where near as good now.

Yeh, thats something I've noticed lately! For example in this video, I've asked the uploader and apparently the settings are maxed out here, but they don't seem to be? Look closely at the trucks at 3:09 especially, everything is blurred.
tZgqZZdLRG4


Contrast to videos of older versions if you can find one, and certainly my memory of it being clearer than that.

Could this be something to do with video drivers?

Daytrader
2017-08-10, 11:47
Yes textures are blurred now, must be something in the update that changed it.

WeeGeez
2017-08-14, 12:30
Should I post this in bug report section?

AlonTavor
2017-08-14, 14:16
Do you have examples? I don't feel anything different with textures.

WeeGeez
2017-08-29, 17:40
I can't recall them looking this bad then again I can't prove they looked better so must be newer games influencing this perception of blurriness. It might be that I'm using widescreen too now... whereas before I was on 19" 4:3 monitor. :)

Bananamaster19822
2017-10-17, 20:08
So, Can anyone provide me with the download link to the manual patch? Please hurry

SucharMistrz
2017-10-17, 21:07
http://files.ancientdev.com/updates/prbf2_1.4.0.0_to_1.4.1.0_client_patch.prpatch

CptPrice
2017-11-03, 10:04
hi everyone
i have a big problem with the update.
I have the problem 1201 with the update, and i cann't update the game, what can i do?

Psyko
2017-11-03, 16:17
the new launcher better not be a bit mining trojan ;-)

Psyko
2017-11-03, 16:26
hi everyone
i have a big problem with the update.
I have the problem 1201 with the update, and i cann't update the game, what can i do?

Check the original post, you gotta re download the game...well, that's what i'm lead to believe.

Cobra-J82
2017-11-18, 09:26
Thanks for the Info.