I is buying RAM and PSU

[[USF]Doc.Pock]

so right to business

RAM:
Corsair 4GBx2 - would cost me 40 euro together
or
Kingston 8GB kit(2x4GB) x1 - would cost me 47 euro

which one?

also for the PSU:

i have no idea with these. i need it to power
intel i5-750@2.7GHz
GeForce 250GTS (and certainly something better in the future)
2 SATA drives
1 SATA CD/DVD unit
4 fans (maybe more in future)
intel dh57dd motherboard
one of the above RAM unnits + 2x2GB i already have inside


thank you very much

DP

[Cossack112]

Corsair value RAM can't run with HyperX series, so go with Kingston.

About PSU - any 500-600W PSU will do (from good manufacturer of course: That would be Corsair, OCZ, Seasonic , etc. ).

[[USF]Doc.Pock]

Ive been thinking this then
CORSAIR NAPAJALNIK ATX 500W

[Cossack112]

Yeah, that would do.

[[USF]Doc.Pock]

Good. 110€ lighter my wallet will be then

[A.Finest[3|AIU]]

Means we can get that map finished then

[[R-COM]MaSSive]

Originally Posted by Cossack112

Corsair value RAM can't run with HyperX series, so go with Kingston.

Now where did you get that from? If you mean on clocks then I can understand but it should run with it.

Pock if you have HyperX then its the best to buy identical ram sticks and dont go with other manufacturer or model.

So HyperX is Kingston but you need to know which ones exactly ( CAS latency - 9-9-9-24-2T etc. ) and then go buy new ones. Of course slighly different latencies wont hurt but as long as its same density or manufacturer.

[Cossack112]

No Massive - I was comparing them... Of course you can put multiple manufacturer RAM sticks on one mobo, but the OC will be messed up really hard.

[[USF]Doc.Pock]

Memory Summary	Reported by BIOS
Memory Type	DDR3
Installed Memory	4096 MBytes
Available Memory	4030 MBytes
Channels	Dual
Maximum Capacity	16384 MBytes
Maximum Memory Module Size	[unknown]
Memory Slots	4
Error Correction	None
Memory Timings
DRAM Frequency	666.7 MHz
CAS# Latency (CL)	9.0
RAS# to CAS# Delay (tRCD)	9
RAS# Prechange (tRP)	9
Cycle Time (tRAS)	24
Command Rate	1T

Device Locator	Slot 1
Memory Type	DDR3 [PC3-10600]
Manufacturer	Kingston
Model	9905403-083.A00LF
Serial Number	4F28789A
Capacity	2048 MBytes
Speed	667 MHz (667 x 2 = 1333)
Manufacturing Date	2009, Week 47
EPP SPD Support	No
XMP SPD Support	No
Supported Frequencies	457 MHz, 533 MHz, 609 MHz, 685 MHz
Memory Timings
JEDEC #1	6.0-6-6-17-23 at 457 MHz, at 1.5 Volts (CL-RCD-RP-RAS-RC)
JEDEC #2	7.0-7-7-20-27 at 533 MHz, at 1.5 Volts (CL-RCD-RP-RAS-RC)
JEDEC #3	8.0-8-8-22-31 at 609 MHz, at 1.5 Volts (CL-RCD-RP-RAS-RC)
JEDEC #4	9.0-9-9-25-34 at 685 MHz, at 1.5 Volts (CL-RCD-RP-RAS-RC)

Device Locator	Slot 2
Memory Type	DDR3 [PC3-10600]
Manufacturer	Kingston
Model	9905403-083.A00LF
Serial Number	4D28819A
Capacity	2048 MBytes
Speed	667 MHz (667 x 2 = 1333)
Manufacturing Date	2009, Week 47
EPP SPD Support	No
XMP SPD Support	No
Supported Frequencies	457 MHz, 533 MHz, 609 MHz, 685 MHz
Memory Timings
JEDEC #1	6.0-6-6-17-23 at 457 MHz, at 1.5 Volts (CL-RCD-RP-RAS-RC)
JEDEC #2	7.0-7-7-20-27 at 533 MHz, at 1.5 Volts (CL-RCD-RP-RAS-RC)
JEDEC #3	8.0-8-8-22-31 at 609 MHz, at 1.5 Volts (CL-RCD-RP-RAS-RC)
JEDEC #4	9.0-9-9-25-34 at 685 MHz, at 1.5 Volts (CL-RCD-RP-RAS-RC)

this is what SIW tells me

[[R-COM]MaSSive]

Those modules you wish to buy are running at 9-9-9-27 @800 Mhz which you cant achieve since your old ones run @667 9-9-9-24

http://www.ec.kingston.com/ecom/conf...9D3K2/8GX&id=1

Not recommended. Im still searching compatibles on that site.

Edit: Compatibles

http://www.pixmania.si/si/uk/4909539...33-pc3-10.html

http://www.pixmania.si/si/uk/9716795...33-pc3-10.html

First is KVR second is KHX