Crash after deploy?

xIRONHEADx · 08-29-2008, 07:41 PM

I have downloaded both the 'Core' and 'Levels' exe's. I load the MOD up and when the level is done loading I click 'deploy' and the game completely shuts off taking me back to my desktop.

SYS:

Toshiba Satellite A215-S4747
AMD 64 X2 2.2Ghz
4GB DDR2 800Mhz
ATI Mobility Radeon X1200 128MB
54 Mbps Atheros WiFi
Windows XP SP3 (Not original OS, Vista was)
BF2 Vanilla v1.41

WilhelmTell · 08-29-2008, 08:29 PM

I have exactly the same problem.

System:
Q6600
4 GB 800Mhz
8800 GT 512mb
Vista 32

I have uninstalled the previous version of PR. Then installed Core + Levels. Al Basrah level loaded, when clicking on deploy in the lower right corner -> CTD without any error message.

Cyrax-Sektor · 08-29-2008, 08:30 PM

Have you guys tried repatching to 1.41? I'm doing that now, because I myself CTDed trying to Deploy on Basrah.

Well that didn't help.

Running 1280x1024 @ 75hz
All Low GFX settings except Medium Geometry, Medium Texture, Medium Texture Filtering and 100% view.
Anti-aliasing at 2x

P.S. I ran on windowed mode, no error message on Basrah, just CTD as soon as it's done loading.

Update: Well, Basrah loaded fine. I honestly hope it was some minor bug and not me joining a .75 server.

pfceverson · 08-29-2008, 08:39 PM

i am wondering i am not all that smart how do u do whatever it is u said might fix this problem

WilhelmTell · 08-29-2008, 09:42 PM

Okay, all maps (new and old) work fine, but Al Basrah (battlearena) doesn't work for me. I just read in another thread that battlearena may be still running the old PR version !?
That could be the problem ...

[R-CON]Wolfe · 08-30-2008, 01:40 AM

Are you running 800x600 resolution?

There is a bug that causes 800x600 resolutions to crash upon deployment. As a temporary fix, use a resolution of 1024x768 or higher. The DEVs working on a fix.

JohnnyRaygun · 08-30-2008, 01:49 AM

I'm running 1280X1024 and getting the same problem. I uninstalled .75, made sure the game was patched to 1.41 and then installed the core then levels. Still CTD after connecting to a server.

[R-CON]Wolfe · 08-30-2008, 01:52 AM

Run PR in window mode. When the game crashes, it will display an error message. Post the error info here.

Rambo_Gump · 08-30-2008, 09:03 AM

I have the same problem, except my game crashes when I click deploy to join the server, so my game never even starts loading.

P.S. How do you run it in window mode?

B.Pummer · 08-30-2008, 10:32 AM

In the shortcut's properties change the Target at the end from fullscreen 1 to fullscreen 0

08-29-2008, 07:41 PM	#1
xIRONHEADx Join Date: Aug 2008 United States of America Location: Oak Harbor, WA Posts: 6	Crash after deploy? I have downloaded both the 'Core' and 'Levels' exe's. I load the MOD up and when the level is done loading I click 'deploy' and the game completely shuts off taking me back to my desktop. SYS: Toshiba Satellite A215-S4747 AMD 64 X2 2.2Ghz 4GB DDR2 800Mhz ATI Mobility Radeon X1200 128MB 54 Mbps Atheros WiFi Windows XP SP3 (Not original OS, Vista was) BF2 Vanilla v1.41

08-29-2008, 08:29 PM	#2
WilhelmTell Join Date: Mar 2006 Location: Berlin, Germany Posts: 43	Re: Crash after deploy? I have exactly the same problem. System: Q6600 4 GB 800Mhz 8800 GT 512mb Vista 32 I have uninstalled the previous version of PR. Then installed Core + Levels. Al Basrah level loaded, when clicking on deploy in the lower right corner -> CTD without any error message.

08-29-2008, 08:30 PM	#3
Cyrax-Sektor Join Date: Oct 2007 United States of America Location: San Antonio, TX Posts: 999	Re: Crash after deploy? Have you guys tried repatching to 1.41? I'm doing that now, because I myself CTDed trying to Deploy on Basrah. Well that didn't help. Running 1280x1024 @ 75hz All Low GFX settings except Medium Geometry, Medium Texture, Medium Texture Filtering and 100% view. Anti-aliasing at 2x P.S. I ran on windowed mode, no error message on Basrah, just CTD as soon as it's done loading. Update: Well, Basrah loaded fine. I honestly hope it was some minor bug and not me joining a .75 server.
	BF2s Trilogy trailer (Hero - Nickelback) Episode 1 - Black Arrow \| Episode 2 - Strike Back The Trackr Project Reality Book [WIP - Map] Arjan Sector
	Last edited by Cyrax-Sektor; 08-30-2008 at 01:43 AM..

08-29-2008, 08:39 PM	#4
pfceverson Join Date: Aug 2008 United States of America Location: leroy/illinois/unitedstates Posts: 3	Re: Crash after deploy? i am wondering i am not all that smart how do u do whatever it is u said might fix this problem

08-29-2008, 09:42 PM	#5
WilhelmTell Join Date: Mar 2006 Location: Berlin, Germany Posts: 43	Re: Crash after deploy? Okay, all maps (new and old) work fine, but Al Basrah (battlearena) doesn't work for me. I just read in another thread that battlearena may be still running the old PR version !? That could be the problem ...

08-30-2008, 01:40 AM	#6
[R-CON]Wolfe PR Contributor Join Date: Mar 2007 United States of America Posts: 1,067	Re: Crash after deploy? Are you running 800x600 resolution? There is a bug that causes 800x600 resolutions to crash upon deployment. As a temporary fix, use a resolution of 1024x768 or higher. The DEVs working on a fix.

08-30-2008, 01:49 AM	#7
JohnnyRaygun Join Date: Aug 2008 Posts: 42	Re: Crash after deploy? I'm running 1280X1024 and getting the same problem. I uninstalled .75, made sure the game was patched to 1.41 and then installed the core then levels. Still CTD after connecting to a server.
JohnnyRaygun Join Date: Aug 2008 Posts: 42

08-30-2008, 01:52 AM	#8
[R-CON]Wolfe PR Contributor Join Date: Mar 2007 United States of America Posts: 1,067	Re: Crash after deploy? Run PR in window mode. When the game crashes, it will display an error message. Post the error info here.

08-30-2008, 09:03 AM	#9
Rambo_Gump Join Date: Aug 2008 United States of America Location: Michigan Posts: 5	Re: Crash after deploy? I have the same problem, except my game crashes when I click deploy to join the server, so my game never even starts loading. P.S. How do you run it in window mode?

	Last edited by Rambo_Gump; 08-30-2008 at 09:12 AM..

08-30-2008, 10:32 AM	#10
B.Pummer Join Date: Sep 2007 Posts: 5	Re: Crash after deploy? In the shortcut's properties change the Target at the end from fullscreen 1 to fullscreen 0
B.Pummer Join Date: Sep 2007 Posts: 5

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Sponsored Links

Sponsored Links