ballistics data

zangoo · 04-11-2008, 11:54 PM

ok so i am working on the ballistics with mosquill and jonny, to do them we need the guns and the bullets they fire, so could someone please make a list of the guns that the cf will be using and, this for each gun

gun name
bullet type, bullet weight, ballistic coeficent, muzzle velocity

this will help get the ballistics done.

Bringerof_D · 04-13-2008, 09:24 PM

C7 - 5.56mm(4.0g) - 925m/s

dont know ballistic coeficient

zangoo · 04-13-2008, 09:26 PM

whats the bullet name? is it a m193?

Bringerof_D · 04-13-2008, 09:43 PM

inot sure i think its probably the ss109/m855, i'm no weapons expert but i asume it is so since the m193 doesnt meet nato standards

zangoo · 04-13-2008, 10:15 PM

guy in this thread says it uses the m193, says he knows cus it is his issued rifle.

http://www.realitymod.com/forum/f119...tml#post649547

DVB-RCRcmdo · 04-14-2008, 05:15 AM

ss109.... i was miss informed at work and i was under the wrong impression, cheers

Bringerof_D · 04-14-2008, 10:37 PM

m193 works and all its just not NATO approved, the only difference really i can tell between the m193 and the ss109 by a document i've found on google is that NATO rounds are created specificaly in factories run by NATO in a NATO nation and has a circle with a cross inside stamped onto the bottom

[R-MOD]Bob_Marley · 04-15-2008, 06:44 AM

Nope, the M193 is a lighter (55 grains compared to M855's 62 grains) which uses a different rifling twist (1:12 against M855's 1:7) and has inferior range and penetration.

Put M193 through a C7, M16A2/A3/A4, L85, etc and it wont be as accurate as they are designed for M855.

zangoo · 04-16-2008, 06:16 PM

ok so in the cf faction i see a c3a1 and a c14, what is going to be the sniper. if someone in charge could please fill this out it would be helpfull.

sniper:
dmr:
main gun:
carbine:
lgm:
pistol:
extra things:

this is what we have right now.

C3A1
C8CT
C7A2
C9
C8
L9
P226N

Bringerof_D · 04-16-2008, 07:08 PM

C14 is the CF sniper rifle, the C3A1 would probably then in this case be our marksman kit

04-11-2008, 11:54 PM	#1
zangoo Join Date: Aug 2007 Location: calgary,ab,canada Posts: 929	ballistics data ok so i am working on the ballistics with mosquill and jonny, to do them we need the guns and the bullets they fire, so could someone please make a list of the guns that the cf will be using and, this for each gun gun name bullet type, bullet weight, ballistic coeficent, muzzle velocity this will help get the ballistics done.

04-13-2008, 09:24 PM	#2
Bringerof_D Join Date: Nov 2007 Canada Posts: 357	C7 - 5.56mm(4.0g) - 925m/s dont know ballistic coeficient
Bringerof_D Join Date: Nov 2007 Canada Posts: 357
	Last edited by Bringerof_D; 04-13-2008 at 09:39 PM.

04-13-2008, 09:43 PM	#4
Bringerof_D Join Date: Nov 2007 Canada Posts: 357	inot sure i think its probably the ss109/m855, i'm no weapons expert but i asume it is so since the m193 doesnt meet nato standards
Bringerof_D Join Date: Nov 2007 Canada Posts: 357
	Last edited by Bringerof_D; 04-13-2008 at 09:44 PM. Reason: missed information

04-14-2008, 05:15 AM	#6
DVB-RCRcmdo Join Date: May 2006 Location: Canada Posts: 91	ss109.... i was miss informed at work and i was under the wrong impression, cheers
	LEST WE FORGET

04-14-2008, 10:37 PM	#7
Bringerof_D Join Date: Nov 2007 Canada Posts: 357	m193 works and all its just not NATO approved, the only difference really i can tell between the m193 and the ss109 by a document i've found on google is that NATO rounds are created specificaly in factories run by NATO in a NATO nation and has a circle with a cross inside stamped onto the bottom
Bringerof_D Join Date: Nov 2007 Canada Posts: 357

04-13-2008, 09:26 PM	#3
zangoo Join Date: Aug 2007 Location: calgary,ab,canada Posts: 929	whats the bullet name? is it a m193?

04-13-2008, 10:15 PM	#5
zangoo Join Date: Aug 2007 Location: calgary,ab,canada Posts: 929	guy in this thread says it uses the m193, says he knows cus it is his issued rifle. http://www.realitymod.com/forum/f119...tml#post649547

04-15-2008, 06:44 AM	#8
[R-MOD]Bob_Marley Forum Moderator Join Date: May 2006 Yugoslavia Location: Essex, UK Posts: 4,545	Nope, the M193 is a lighter (55 grains compared to M855's 62 grains) which uses a different rifling twist (1:12 against M855's 1:7) and has inferior range and penetration. Put M193 through a C7, M16A2/A3/A4, L85, etc and it wont be as accurate as they are designed for M855.
	The key to modernising any weapon is covering them in glue and tossing them in a barrel of M1913 rails until they look "Modern" enough. El_Vikingo: Bob_Marley, the level 70 pimp, will satisfy your needs. Many thanks to the Forum's no.1 hottie for the sig pretties.

04-16-2008, 06:16 PM	#9
zangoo Join Date: Aug 2007 Location: calgary,ab,canada Posts: 929	ok so in the cf faction i see a c3a1 and a c14, what is going to be the sniper. if someone in charge could please fill this out it would be helpfull. sniper: dmr: main gun: carbine: lgm: pistol: extra things: this is what we have right now. C3A1 C8CT C7A2 C9 C8 L9 P226N

04-16-2008, 07:08 PM	#10
Bringerof_D Join Date: Nov 2007 Canada Posts: 357	C14 is the CF sniper rifle, the C3A1 would probably then in this case be our marksman kit
Bringerof_D Join Date: Nov 2007 Canada Posts: 357

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Sponsored Links

Sponsored Links